High speed maglev is one of the most important reformations in the ground transportation systems because of its no physical contact nature. This paper intends to study the dynamic response of the single-span guideway induced by moving maglev train. The dynamic model of the maglev train-guideway system is established. In this model, a maglev train consists of three vehicles and each vehicle is regarded as a multibody system with 34 degrees-of-freedom. The guideway is modeled as a simply supported beam. Considering the motion-dependent nature of electromagnetic forces in the maglev system, an iterative approach is presented to compute the dynamic response of a maglev train-guideway system. The histories of the train traversing the guideways are simulated and the dynamic responses of the guideway and the train vehicles are calculated. A field experiment is carried out to verify the results of the analysis. The resonant conditions of single-span guideway are analyzed. The results show that all the dynamic indexes of train-guideway system are far less than permissive values of railway and maglev system, the vertical resonant of guideways caused by periodical excitations of the train will not happen.

The resonance characteristics of a two-span continuous beam traversed by moving high speed trains at a constant velocity is investigated, in which the continuous beam has uniform span length. Each span of the continuous beam is modeled as a Bernoulli-Euler beam and the moving trains are represented as a series of two degrees-of-freedom mass-springdamper systems at the axle locations. A method of modal analysis is proposed in this paper to investigate the vibration of two-span continuous beam. The effects of different influencing parameters, such as the velocities of moving trains, the damping ratios and the span lengths of the beam, on the dynamic response of the continuous beam are examined. The two-span continuous beam has two critical velocities causing two resonance responses, which is different from simple supported beam. The resonance condition of the two-span continuous beam is put forward which depends on the first and second natural frequency of the beam and the moving velocity.

The treatment of calcium chloride with sodium carbonate under solvent-free conditions with a supersonic airflow and at a low heating temperature leads to the synthesis of ultra-fine calcium carbonate. The reaction not only involves mild conditions, a simple operation, and high yields but also gives a high conversion rate.